Jeff
13-inch wheels
-
GS guy
- Posts: 909
- Joined: Wed Nov 06, 2002 12:01 am
Re: 13-inch wheels
In aluminum? With spun wheel halves? Haven't seen too many in 13" sizes Dale - but midget sprint cars use them and they do look Hot!
Jeff
Jeff
-
Dale M.
- Posts: 1673
- Joined: Mon Oct 05, 2009 8:09 am
Re: 13-inch wheels
Pardon me.... I was thinking steel....
Dale
Dale
"Fear The Government That Wants To Take Your Guns" - Thomas Jefferson
1970 "Kellison Sand Piper Roadster"
1970 "Kellison Sand Piper Roadster"
-
GS guy
- Posts: 909
- Joined: Wed Nov 06, 2002 12:01 am
Re: 13-inch wheels
No biggie Dale 
I figured you were talking about steelies having seen your great posts on resources for getting custom wide wheels. I too have pondered using 13" wheels, in ultra-wide widths. I guess that stems from another Deserter owner (below) who has posted pics of his race buggy with them - just something about that "look" with ultra-wide 13" wheels and matching tires, like an earlier era F1 car. The mind exercise gets difficult trying to source available tires (besides race tires) for these wheels. Slim pickin's for tires, but there are a couple of sources I've come across. Another is the re-produced Michelin TB15, but lots'a $$$ for these!
This look is just out and out Cool in my book!
Cheers!
Jeff
I figured you were talking about steelies having seen your great posts on resources for getting custom wide wheels. I too have pondered using 13" wheels, in ultra-wide widths. I guess that stems from another Deserter owner (below) who has posted pics of his race buggy with them - just something about that "look" with ultra-wide 13" wheels and matching tires, like an earlier era F1 car. The mind exercise gets difficult trying to source available tires (besides race tires) for these wheels. Slim pickin's for tires, but there are a couple of sources I've come across. Another is the re-produced Michelin TB15, but lots'a $$$ for these!
This look is just out and out Cool in my book!
Cheers!
Jeff
-
ONEBADBUG
- Posts: 213
- Joined: Wed Dec 02, 2009 9:25 pm
Re: 13-inch wheels
Hey, those Ventus wheels were looking good until I figured out they are race tire, rains. They would destroy themselves in the dry.
-
GS guy
- Posts: 909
- Joined: Wed Nov 06, 2002 12:01 am
Re: 13-inch wheels
Crap - you're right badbug. Sorry about that, I thought they were DOT's.
How about these Avons:
http://www.avonmotorsport.com/road-lega ... ance/cr500
Might be tough to find in the states?
How about these Avons:
http://www.avonmotorsport.com/road-lega ... ance/cr500
Might be tough to find in the states?
-
r1cpowdercoating
- Posts: 210
- Joined: Wed Dec 08, 2010 9:37 am
Re: 13-inch wheels
hey I got some BBS wheels that 13x6 for sale if anybody wants them
ron
ron
-
ProctorSilex
- Posts: 228
- Joined: Sun Jul 17, 2011 6:09 pm
Re: 13-inch wheels
There can be a lot of reasoning behind tire and rim proportions. Some of which were already mentioned: change gear ratio; change ride height without changing suspension geometry; and style.
There are probably more than I know, but here are some:
-Larger profile tires are good for laying down power with maximum grip. Drag racing tires are made to "wrinkle" on launch.
-Thinner tire profiles are typically more responsive to turning, but they are harder to manage and can yield longer lap times.
-Thicker tire profiles are less responsive and have less driver feedback, but are more forgiving.
-Stepping up the rim diameter increases unsprung weight. Stepping down, decreases it. I do not think that this does as much as people think.
Everything except for the dragging was from an article I read a few years ago in either GRM or Sports Car.
I think that the tire contact patch size is also affected: thinner profile yields a smaller patch while thicker yields a larger patch.
I wish I knew enough to give you advice on specific choices. There is a lot to tire and rim selection, but I would not give much thought to it unless I were at the top of my game.
There are probably more than I know, but here are some:
-Larger profile tires are good for laying down power with maximum grip. Drag racing tires are made to "wrinkle" on launch.
-Thinner tire profiles are typically more responsive to turning, but they are harder to manage and can yield longer lap times.
-Thicker tire profiles are less responsive and have less driver feedback, but are more forgiving.
-Stepping up the rim diameter increases unsprung weight. Stepping down, decreases it. I do not think that this does as much as people think.
Everything except for the dragging was from an article I read a few years ago in either GRM or Sports Car.
I think that the tire contact patch size is also affected: thinner profile yields a smaller patch while thicker yields a larger patch.
I wish I knew enough to give you advice on specific choices. There is a lot to tire and rim selection, but I would not give much thought to it unless I were at the top of my game.