My 71 Westy EFI MEga Squirt Bus Build Thread

supaninja · Post by **supaninja** » Fri Dec 16, 2011 10:35 pm

I was being sarcastic 36-38mm tb's would be as big as I would go, for reference weber 44's have 36mm venturis. CSP does make a type manifold but they are $$$. The link-sync is awesome, I pm'd Pete twice about doing my linkage, life must have gotten in the way because he never replied so I made my own linkage.

I'm done with off the shelf stuff, if I can make it or build then that's what I'm going to do. I just won another set of TB's off eBay...$21.

kuleinc · Post by **kuleinc** » Fri Dec 16, 2011 10:52 pm

Speaking of cheap throttle bodies, I may get some FREE webbers which I could turn into throttle bodies if I can get some cheap webber type iv manifolds to weld injector bungs onto I'd be set!! I don't have engine bay height constraints, like you do, in my 1971 bus!

kuleinc · Post by **kuleinc** » Fri Dec 16, 2011 11:17 pm

I think I can just get 48IDF carb intakes from aircooled.net for type iv motor with DTM shroud and put some webbers on top and convert them to throttle bodies?

supaninja · Post by **supaninja** » Sat Dec 17, 2011 3:57 am

yup, you can but you need to figure out a TPS.

kuleinc · Post by **kuleinc** » Sun Dec 18, 2011 6:41 pm

Got the White Bus engine and trans out, now to make a test stand!

This thing has like 800 Miles on it...

White 1968 Bus is almost ready to go to chris at Oakland Aircooled!

fusername · Post by **fusername** » Thu Apr 26, 2012 4:14 pm

ever get that tank mounted? its really easy. there were even holes pre-drilled on my bus for it!

Shoptalkforums.com

My 71 Westy EFI MEga Squirt Bus Build Thread

Re: My 71 Westy EFI MEga Squirt Bus Build Thread

Re: My 71 Westy EFI MEga Squirt Bus Build Thread

Re: My 71 Westy EFI MEga Squirt Bus Build Thread

Re: My 71 Westy EFI MEga Squirt Bus Build Thread

Re: My 71 Westy EFI MEga Squirt Bus Build Thread

Re: My 71 Westy EFI MEga Squirt Bus Build Thread