New 69 Ghia Project

VW underneath a classic Italian body design.
User avatar
FJCamper
Moderator
Posts: 2910
Joined: Wed Nov 14, 2007 2:19 pm

Re: New 69 Ghia Project

Post by FJCamper »

Hi 2JMotorsports,

Specifically what brand and type of 195-50 x 15 tires are you using?

A set of 50-series lowers you almost two inches, but causes no suspension geometry problems.

FJC
User avatar
2jmotorsports
Posts: 31
Joined: Sun Mar 02, 2008 12:43 am

Re: New 69 Ghia Project

Post by 2jmotorsports »

FJC, they are Dunlop SP Sport 2000. I had them on a Honda Fit and found them to be quite grippy. Even though my suspension is stock height, the car got lower and I still have ground clearance and suspension travel for the inevitable pot holes all over where I live. Ill leave it as is until I can start tuning the suspension a bit more. Driving and handling aids first then power increase later.
User avatar
2jmotorsports
Posts: 31
Joined: Sun Mar 02, 2008 12:43 am

Re: New 69 Ghia Project

Post by 2jmotorsports »

Image

Gauge dry fit. So far so good.
User avatar
2jmotorsports
Posts: 31
Joined: Sun Mar 02, 2008 12:43 am

Re: New 69 Ghia Project

Post by 2jmotorsports »

Progress has slowed to a crawl, but it has not stopped. My 7 month old little girl is a handful. =)

Image

When I start putting the dash back together, Id like to clean up the wiring as best as possible. Is there a good way of cleaning electrical contacts other than manually abrading each one to remove dirt and corrosion? Any recommended cleaners? My wiring harness is intact and I will only be making minor modifications as necessary to get the 914 gauges to work.
User avatar
Fiatdude
Posts: 971
Joined: Mon Oct 12, 2009 6:58 pm

Re: New 69 Ghia Project

Post by Fiatdude »

Your dash has come out neat!!! Mine is a lot more butchered up than yours

I took everything out that i could and bead blasted them to clean up the connections -- The wire ends I did manually -- I took pictures of everything so I could remember what wire went where

Image
User avatar
2jmotorsports
Posts: 31
Joined: Sun Mar 02, 2008 12:43 am

Re: New 69 Ghia Project

Post by 2jmotorsports »

I have not given up yet. I have fully operational speedo, tach, and fuel gauge in addition to the lights and hazard switch. Waiting for a sender for the temp gauge.

Image

Anybody know where to buy the light bulb sockets on 914 gauges? I have searched and have come up empty handed.

Image

Many of my dummy lights are missing the sockets and bulbs.
lcvaldetaro
Posts: 73
Joined: Sun May 19, 2013 10:42 am

Re: New 69 Ghia Project

Post by lcvaldetaro »

Question - You are using 195/60/15 tires on 5.5 rim? Isn't that too wide for the rim?
User avatar
2jmotorsports
Posts: 31
Joined: Sun Mar 02, 2008 12:43 am

Re: New 69 Ghia Project

Post by 2jmotorsports »

lcvaldetaro wrote:Question - You are using 195/60/15 tires on 5.5 rim? Isn't that too wide for the rim?
Using 195/50/15s.
lcvaldetaro
Posts: 73
Joined: Sun May 19, 2013 10:42 am

Re: New 69 Ghia Project

Post by lcvaldetaro »

SOrry, my mistake. Still, using a 195/50/15s on a 5.5 rim? That's over two inches wider than the rim; WHat kind of tire pressures are you using?

My instinct tells me you would be a bite better off with a 185 or even a 175.
Post Reply