Suspension port cover-how to keep them on
-
daweeen
- Posts: 69
- Joined: Sun Dec 15, 2002 12:01 am
Suspension port cover-how to keep them on
Hi, How can I keep the suspension port covers on? One side is nice and tight but the other keeps slipping. It hasn't fallen out yet but is hanging. I hope I'm calling it the correct wording. It's the cover for the holes on they body, just in front of the rear wheels.
-
Piledriver
- Moderator
- Posts: 22865
- Joined: Sat Feb 16, 2002 12:01 am
Re: Suspension port cover-how to keep them on
Sometimes the inner disc under the retention nut need a little attention with hammer/pliers...
Many times it's simply a matter of putting it together right.
Many times it's simply a matter of putting it together right.
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.