Hey all,
I'm looking at a A1 Sidewinder for my WBX, but I haven't seen one in person. Is there any reason (other than the rear head flanges - I could just swap the J-pipes from 1 side to the other right) the systems wouldn't clear the front pulley / waterpump for my Ghia?
Headers / exhaust systems for the WBX
-
DORIGTT
- Posts: 617
- Joined: Thu May 18, 2000 12:01 am
Headers / exhaust systems for the WBX
You do not have the required permissions to view the files attached to this post.
-
Steve Arndt
- Posts: 7420
- Joined: Sat Mar 10, 2001 12:01 am
Re: Headers / exhaust systems for the WBX
Please let us know, and does it fit a Syncro?
Steve
My Baja Build
My Baja Build
-
buildabiggerboxer
- Posts: 621
- Joined: Wed Mar 25, 2009 12:50 pm
Re: Headers / exhaust systems for the WBX
dorigtt, you will need to turn the flanges for cyls 4 & 1, i cant say either way if it will clear the water pump, it may hit the 'stat housing on early pumps , or the pulley on later ones. Steve, with a bus install , with all his experience with the vanagons, 10c will be the man to know if it will clear the engine support bar or not, he may chime in later.
-
tencentlife
- Posts: 424
- Joined: Tue Apr 25, 2006 8:13 am
-
DORIGTT
- Posts: 617
- Joined: Thu May 18, 2000 12:01 am
Re: Headers / exhaust systems for the WBX
If the 1 and 4 pipes are slip-in, I can just swap them correct?
-
AMBROSIA
- Posts: 248
- Joined: Wed Jul 27, 2005 5:37 am
Re: Headers / exhaust systems for the WBX
I had a sidewinder style header made by a specialist.
-
giuseppe
- Posts: 5
- Joined: Fri Apr 05, 2013 11:02 am
Re: Headers / exhaust systems for the WBX
empi bobcat modificata per il turbo.. 
You do not have the required permissions to view the files attached to this post.