Throttle cable set up for ej22

[Buggin_74]

As above the throttle body inverter I just made myself but you can buy them off the shelf.
I didn't want to cut my firewall but I can't flip my intake manifold either as I'm running A/C

I didn't hook up the water lines, they are only needed in below freezing temps and some of the subaru crowd have actually got power gains by leaving them disconnected and there was only one vac line on my throttle body to the charcoal canister which I have capped off anyway.

My build thread was on Aussieveedubbers but it badly needs an update, changed a few things over the last few years.

[Dazoc]

I think RJES makes the throttle body reverser. I found mine on the for sale area. It works out nicely to make the throttle cable on the right side and working normal. I had a good friend do some work to the linkage elbow, and now it will bolt right up with stock cable.

[DBUG Nist]

Im really interested in flipping the throttle body mainly the reason for the throttle cable on the same side as the driver.

Ill have to check that thread out again its been about 4 months. what did you do with your egr?
thanks for all the info!