To Zerk or not to Zerk that is the question

Post by **Leatherneck** » Sat Apr 20, 2019 11:42 am

So should li drill tap and slap a Zerk in there?

CentralWAbaja · Post by **CentralWAbaja** » Sat Apr 20, 2019 3:15 pm

More importantly. Did you weld that tab on for the trans? Dang that's a nice one!

Post by **Leatherneck** » Sat Apr 20, 2019 3:38 pm

Gotcha, thought so but may I see don’t so thought I’d ask. I did

, slowly getting better. It helps having a helmet I can actually see the weld happening vice a bright spot where I’m hoping to weld.

CentralWAbaja · Post by **CentralWAbaja** » Sat Apr 20, 2019 5:22 pm

Never seen the inner pivots get a zerk

Post by **Leatherneck** » Sat Apr 20, 2019 6:25 pm

You will now. See what it does.

PhillipM · Post by **PhillipM** » Tue Apr 23, 2019 7:56 am

I never bother, by the time the grease is gone the bush is usually sloppy and wants changing anyway

fordfreak · Post by **fordfreak** » Fri May 03, 2019 9:40 am

I zerked mine!! Works good. I'll post a pic later

Post by **Leatherneck** » Fri May 03, 2019 12:10 pm

fordfreak wrote: ↑Fri May 03, 2019 9:40 am I zerked mine!! Works good. I'll post a pic later

I could tell in mine from dry to greased. I’ve always ran them dry. Also hoping this will help there be no chance of the torsion bolt backing out.

Shoptalkforums.com