New member
-
bauerl
- Posts: 3
- Joined: Thu Sep 05, 2019 8:12 pm
New member
Hello, I'm new 1973 bus owner. Its a restoration project. Right now I'm trying to figure out what is wrong with #4 cyl. compression test. Dry test 1st 140, 2nd 130, 3rd 135, 4th 105. Wet test every cyl. comes up approx. 5lbs.
-
V8Nate
- Posts: 850
- Joined: Mon Sep 03, 2018 12:34 pm
Re: New member
Make sure valves are adjusted properly
-
Ol'fogasaurus
- Posts: 17881
- Joined: Mon Nov 13, 2006 10:17 pm
-
bauerl
- Posts: 3
- Joined: Thu Sep 05, 2019 8:12 pm
Re: New member
Valves are adjusted to .006 on both intake and exhaust. I will repeat to the test after I can run it for ten minutes or so.
-
Bruce.m
- Posts: 1024
- Joined: Sun Aug 11, 2013 1:44 pm
Re: New member
Blow compressor into spark plug with the valves shut and listen for a hiss from inlet / exhaust/ case breather, to find out where the losses are coming from.