Identifying lifters help

[farmer rob]

I wondered if anyone could identify a set of lifters for me. They weigh 94 grams and have 29mm feet. They came with a performance engine I bought in pieces and I wondered if they were matched to an Engle cam, all the bit's are new.

Many thanks Rob

[Bruce2]

Got a pic?

At 94g, they sound like Scat heavyweight lifters.

[farmer rob]

Thanks for the reply! The chap I bought it off thought they were scat lifters but all the scat one's I have found so far on-line, were lighter or didn't show a weight. I thought I would use CB lifters on this but thought I could use them on something else if I could Identify them. I will post a couple of photo's tomorrow if you think it would help.

Cheers Rob

[farmer rob]

See if this works, not posted a photo on here for a while lol



The original VW lifters I have seem to have feet about 5mm thick, these are tapered, about 3.5mm on the edge and about 4.75mm by the upright

Cheers Rob

[Bruce2]

Stock lifters are 82g. Scat "Lightweight" lifters are 94g. That is why I call them Scat heavyweight lifters.

[farmer rob]

Many thanks Bruce

Rob