Hi ya'll. So, im putting boxter brakes on my '65 T1 (lanner latest rage hubs, 986 brembos, 986 rotors).
This is probably a stretch, but i figured I;d ask any how. Does any one have the dimensions or drawings of adapters to fit my set up?
God bless
Aiden
caliper adapters for boxter set up on link pin
-
beefstew
- Posts: 2
- Joined: Thu Mar 17, 2022 10:57 am
-
DORIGTT
- Posts: 614
- Joined: Thu May 18, 2000 12:01 am
Re: caliper adapters for boxter set up on link pin
Doesn't Lanner have them?
-
H2OSB
Re: caliper adapters for boxter set up on link pin
Heh. Good point. Lanner made the set up for my 1303 using Porsche 924 spindles. No reason a few parts couldn't be swapped out to make it work for a link pin set up. The only issue against using "off the shelf" Lanner parts is the hubs may be slightly different than how he'd make them for a Link pin because I had him machine then to be hub-centric for Porsche wheels.
Unfortunately the calipers wouldn't clear my 15 inch wheels and I had spent many months (actually more like years) gathering three sets for various applications, not to mention having a "temporary spare" made using the center of an old 912 wheel welded to a legit temporary spare outer rim. I'm committed to 15 inch Porsche wheels.
H20SB
Unfortunately the calipers wouldn't clear my 15 inch wheels and I had spent many months (actually more like years) gathering three sets for various applications, not to mention having a "temporary spare" made using the center of an old 912 wheel welded to a legit temporary spare outer rim. I'm committed to 15 inch Porsche wheels.
H20SB