Hi all. AA Performance has 96x71 pistons, part #VW9600T4S71P for sale. Ad copy says “works with 71 to 78mm cranks.” With a compression height of 35.5 would this be considered a stroker piston for a 80mm crank?
Thanks.
Newbie piston question
-
AdminSteve
- Site Admin
- Posts: 267
- Joined: Mon Dec 04, 2006 8:46 am
Re: Newbie piston question
No the wrist pin height is wrong, you would need something with approximately a 30mm pin height to account for the added stroke. VW9600T4SB JE
AdminSteve
AdminSteve
S&S Aircooled Parts and Accessories
645 S State College Blvd, Unit E
Fullerton, CA 92831
www.ssaircooled.com
(714)886-7636 Phone
645 S State College Blvd, Unit E
Fullerton, CA 92831
www.ssaircooled.com
(714)886-7636 Phone
-
ravenshurst
- Posts: 226
- Joined: Wed Jun 13, 2001 12:01 am
Re: Newbie piston question
Thanks Steve. Much appreciated.
-
ravenshurst
- Posts: 226
- Joined: Wed Jun 13, 2001 12:01 am
Re: Newbie piston question
I was thinking wbx rods @ 5.325” with 24mm pins. Am I seriously confused, or just normally confused? 80mm crank with 5.325 wbx rods and 96 flat tops with 24mm pins. So.....wit the 22mm wrist pin can I use stock type 1 pistons?