drms or discs

john@stafford.net · Post by **john@stafford.net** » Thu Aug 29, 2002 4:45 am

Keep in mind that the typical Ghia type dis setup is heavier than your old drum brakes. This effects handling, specifically rebound response, so you might look into new shocks.

Bobnotch · Post by **Bobnotch** » Thu Aug 29, 2002 10:30 am

Marc,just went out and checked them, they are just under 9.75" inside diameter,by 2 3/16" deep. Also have a part number of 311-405-615A, also a VW symbol and a mfg casting company of W&E. I hope this helps.
Bob 65 Notch S

Bobnotch · Post by **Bobnotch** » Thu Aug 29, 2002 10:31 am

Oh yeah forgot,YES they are fronts.
Bob 65 Notch S

67type3 · Post by **67type3** » Thu Aug 29, 2002 5:55 pm

<BLOCKQUOTE>quote:<HR>Originally posted by Bucko:
$200.00 for drums? From who? I just bought 2 new rear drums for a 73 and they were $53.00 apiece. That was for Bendix brand drums. Great quality.

The disk brake conversion is a far better setup though.<HR></BLOCKQUOTE>

these are for a '66 type3 sq back

[This message has been edited by 67type3 (edited 08-29-2002).]

67type3 · Post by **67type3** » Thu Aug 29, 2002 5:58 pm

<BLOCKQUOTE>quote:<HR>Originally posted by Marc:
If memory serves, Type III drums were the same diameter as SuperBeetle fronts (9.822" turn-out limit). They should be right about 9.75" when brand-new - sounds like you've got some good stuff there.<HR></BLOCKQUOTE>

so, can i get a superbettle drum?

Bobnotch · Post by **Bobnotch** » Thu Aug 29, 2002 8:00 pm

No, you can't use the super drum as it is not deep enuf(2 3/16 inch deep on the type3). Also super beetles use 4 lug wheels.
Bob 65 Notch S

Post by **Marc** » Thu Aug 29, 2002 11:17 pm

<BLOCKQUOTE>quote:<HR>Originally posted by Bobnotch:
....they are just under 9.75" inside diameter...<HR></BLOCKQUOTE>

If memory serves, Type III drums were the same diameter as SuperBeetle fronts (9.822" turn-out limit). They should be right about 9.75" when brand-new - sounds like you've got some good stuff there.