Truck Bed liner on my Thing

GhiaRacing · Post by **GhiaRacing** » Thu Aug 08, 2002 11:02 pm

Hey, I posted this up on the Off Road Forum, can you guys help me out? J
http://shoptalkforums.com/bbs/NonCGI/Fo ... 00357.html

------------------
Wanted:
-Beige Upholstery for 68 Ghia (front & back)

LB181 · Post by **LB181** » Fri Aug 09, 2002 1:20 pm

The POR Primer should be fine. The bedliner should stick to it because they have been using that POR on hotrods a lot to keep rust from forming. What you can do is just try it on a srap piece of metal or somewhere it does not show to test it out. I would think the primer would be fine. I am planning to do the same thing.

LB181 · Post by **LB181** » Fri Aug 09, 2002 1:28 pm

You probably already checked it out but I read on the POR Website FAQ that: "Tie-Coat Primer is not a reactive coating (as is POR-15, which reacts to moisture), but its revolutionary adhesion promotors make it an ideal interlocking prime coat between POR-15 and various topcoats."
Hope that helps.

74Shagenwagen · Post by **74Shagenwagen** » Fri Aug 09, 2002 2:44 pm

See my replies in the Interior Exterior forum and also the Off Road forum.

GhiaRacing · Post by **GhiaRacing** » Fri Aug 09, 2002 5:59 pm

Thanks, I put my reply on: http://shoptalkforums.com/bbs/NonCGI/Fo ... 00357.html
J

GhiaRacing · Post by **GhiaRacing** » Sat Aug 10, 2002 10:22 am

I put my reply on http://shoptalkforums.com/bbs/NonCGI/Fo ... 00357.html
Thanks, J