OBX Short-block Kit

jasonb · Post by **jasonb** » Fri Feb 07, 2003 9:56 am

That's what I want.

I keep on going back and forth about doing an OBX project. It would be easier to commit to if there were a kit out there that included the machined case, crank, flywheel, seals, cylinders and all the bearings.

I want a kit with all the OBX conversion details worked out in advance so that I can go about the business of selecting rods, cam, heads, etc. Maybe there could be a stage 2 kit with Biral cylinders and 82 stroked crank.

What do you guys think? Are there other people out there who are interested in the OBX but would like it to be as easy to plan as a type1?

Type 5 Joe · Post by **Type 5 Joe** » Fri Feb 07, 2003 10:12 am

I do these on a custom basis, I would need your case.

You need to decide what pistons, rods, stroke, ect...

E-mail me at accu_tech_inc@yahoo.com

- Joe

vwmorten · Post by **vwmorten** » Wed Feb 19, 2003 3:15 am

I have a converted case and all nessecary wbx parts except crank, flywheel and bearings that you can buy outright..
see: http://shoptalkforums.com/bbs/NonCGI/Fo ... 00018.html

I also have a 94mm P/C set wich have been machined for a 76.4mm crank (2.1)

case and small parts: 600$
P/C set (new, but without rings) 300$
+ shipping

SprintStar · Post by **SprintStar** » Tue Feb 25, 2003 7:41 pm

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Type 5 Joe:
<B> I do these on a custom basis, I would need your case.

You need to decide what pistons, rods, stroke, ect...

E-mail me at accu_tech_inc@yahoo.com

- Joe</B><HR></BLOCKQUOTE>

Hello Joe,

We need to talk. Sending ya email soon.

Sprint.