What are the engine dimensions of a wasserboxer engine? Can someone supply me the length width and height?
Thanks,
Scott
engine dimensions
-
Piledriver
- Moderator
- Posts: 22859
- Joined: Sat Feb 16, 2002 12:01 am
Not unless I grab a tape measure and go out back...
What I can say:
Virtually identical to a T1.
Any difference is a mm or 2 at most here and there.
What I can say:
Virtually identical to a T1.
Any difference is a mm or 2 at most here and there.
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
-
swoodard23
- Posts: 117
- Joined: Mon Dec 02, 2002 12:01 am