HELP! Oxyboxer question.

BlownFinn · Post by **BlownFinn** » Wed Dec 03, 2003 3:51 am

Hey there,

My case (2,1) is being machined as I Write this, and I´m quite aware of the problems that I´m going to have to deal with as this conversion goes forward.

But there is one thing I was wondering. Can I use stock/typ1 pushrod tubes? The holes/guides for the tubes in the wassercase seem to be bigger than in a typ1 case. Am I right? What tubes have you guys used?

Thans very meny

Niklas

BlownFinn · Post by **BlownFinn** » Fri Dec 05, 2003 4:11 am

...maybe you fellas can do without them? Guess I´ll have to make them my self then.

Niklas

Post by **Tom Notch** » Fri Dec 05, 2003 5:20 am

The Vanagon replacement tubes are Very Good. They are expandable in length and the heads end is smaller like a t1. The stock wasser tubes will also work.

BlownFinn · Post by **BlownFinn** » Fri Dec 05, 2003 5:37 am

Really? Now I feel stupid. It was that easy - I was allready designing my own from ally.

Thanks a lot Tom, I really appriciate that. Be well.

Niklas