Wheel Adapters......Needed

VW's aircooled mini SUV. Great for riding in the country, or cruising the beach.
B.
Posts: 10
Joined: Fri Aug 29, 2003 7:42 am

Wheel Adapters......Needed

Post by B. »

Hello, People

I need of a pair of wheel adapters for the front disc brakes on my '74.
I want to take them from there current 4-lug back to 5-lug. New or used
I dont care, just as long as they are correct and fit properly.

**** Those with the wheel adapters on there Thing, is there anything
that I should watch/look for regarding the adapters?

If you know of anyone who might have an extra pair looking to sell
please pass on the message.
Last edited by B. on Wed Jan 13, 2010 5:07 pm, edited 1 time in total.
User avatar
Bob Ingman
Posts: 2869
Joined: Mon Mar 19, 2001 12:01 am

Post by Bob Ingman »

B glad to see you over here. We saw your message on topica as well. Hope you find some but remember any VW aftermarket supplier will stock this item. Best of luck. Bob Ingman
B.
Posts: 10
Joined: Fri Aug 29, 2003 7:42 am

Wheel Adapters.....More Questions

Post by B. »

Ok.....

So with the work & risk of puting a spacer with the adapter. It might just be easier to take the rear 5-bolt and make them 4-bolt........Yes?


I have a set (4) EMPI 5-bolt White Spoke Steel Wheels. Currently on the Thing are 4-bolt in the front (due to the disc brakes) & 5-bolt in the rear both are the EMPI white spoke steel wheel. If I go with 4-bolt in the rear I have to buy anaother pair of 4-bolt wheels along with the adapters,then I will have a set of 5-bolt to try and sell. Or get the adpaters for the front and not have to buy a pair of 5-bolt wheels.

I'm not stuck on either bolt pattern as far as the design goes. I just want to make the change with the least amount of $ spent and have a safe driver for the weekends,etc.

Any feedback is welcomed.

Cheers,
Brent


-------------------------------------------------------------------------------------
Hello, People

I need of a pair of wheel adapters for the front disc brakes on my '74.
I want to take them from there current 4-lug back to 5-lug. New or used
I dont care, just as long as they are correct and fit properly.

**** Those with the wheel adapters on there Thing, is there anything
that I should watch/look for regarding the adapters?

If you know of anyone who might have an extra pair looking to sell
please pass on the message.


Many Thanks,
B.
User avatar
Michael Basso
Posts: 45
Joined: Sun Jan 05, 2003 12:01 am

Post by Michael Basso »

You can just use 4 lug drums on the back, standard type 1 drum.
I can get them for you
Thanks,
User avatar
Bob Ingman
Posts: 2869
Joined: Mon Mar 19, 2001 12:01 am

Post by Bob Ingman »

B. Where are you located? Bob
B.
Posts: 10
Joined: Fri Aug 29, 2003 7:42 am

Wheel Adapters

Post by B. »

Bob,

As for 4-bolt pattern T1 drums on the rear of the Thing. Are we all correct that it will work/fit correctly and not do nay harm to any other areas?

I have been getting many many mixed feedback reagrding the "bug" T1 rear drums on the Thing.

Thanks again for the assistance.
Last edited by B. on Wed Jan 13, 2010 5:08 pm, edited 1 time in total.
User avatar
Bob Ingman
Posts: 2869
Joined: Mon Mar 19, 2001 12:01 am

Post by Bob Ingman »

B its not my place to say ya or nay on this issue other than I think the Thing is a natural in wide five and that there are plenty of them around in four hole. The choice is yours. Best of luck. Bob Ingman
Capn Skully
Posts: 400
Joined: Mon May 05, 2003 5:56 am

Post by Capn Skully »

I have some "modern" four bolt" drums for beetles, front or rears, only $10.00 each plus shipping.

Let me know how many you want.

You can get the 4 to 5 adapters at cip1.com about $20 each.

Thanks,
Gary
B.
Posts: 10
Joined: Fri Aug 29, 2003 7:42 am

Post by B. »

Gary,

PM me when you get a chance.

Thx,
Post Reply