Heater Blower?

[DeathBus]

I know seems like a strange topic for JUNE, but anyway.

Is this the same motor that was put into type 4 powered Buses? Mine is COMPLETELY missing, and while I am working on the car I figured I might as well get it 100%.

EDIT:: I am refering to the blower in the Engine compartment. Not the one on the Ebarspacher.

[justinshelton]

The blower is sort of the same. At least, the fan housing and motor are identical. The difference is that the 411/412 blower has three bolts that connect it to the rigid upper part of the air intake bellows.

The bus fan connects to the top of the engine compartment via a bracket.

I think you could make the heater fan from a bus fit onto your 411/412 w/o any problems . . .

- Justin

[DeathBus]

I have the housing, not the fan, I wonder how easy it is to pull the fan from the housing?

[wildthings]

I've got one of these fans that I would be willing to sell. Say $20 buck plus shipping. I took it out of my 411 when I swapped over to the L-jet injection and I couldn't but the hoses back on the fan because of the location of the L-jet air cleaner.

[wildthings]

I've got one of these fans that I would be willing to sell. Say $20 buck plus shipping. I took it out of my 411 when I swapped over to the L-jet injection and I couldn't but the hoses back on the fan because of the location of the L-jet air cleaner.

[Single 60]

Or you could try your luck on e-bay.






http://cgi.ebay.com/ebaymotors/ws/eBayI ... ename=WDVW

[raygreenwood]

Justin has it about right. The motor on the bus fan and the 411/412 sedan fan are the same. The housing looks slightly different, but its mostly the hanging bracket. The wagon used a slightly more compact motor and fan assembly...but I have swapped them onto the sedan housing in a pinch. Ray

[DeathBus]

can I remove the fan from the housing and swap them?

[raygreenwood]

If I recall...you can. You may have to swap fans on the shaft. Ray