Damper pipe gasket...

can86 · Post by **can86** » Thu May 18, 2006 9:22 am

Anyone know if i can get the dohnut gasket, or where? Or is something else being used? thanks

raygreenwood · Post by **raygreenwood** » Thu May 18, 2006 2:27 pm

From what I understand, The donut for the center exit damper pipe is about all thats available. Check kerr auto in OKC 405 232 9581. Ray

albert · Post by **albert** » Thu May 18, 2006 3:10 pm

hi, can86 , you can buy that in many place , look in ,,,bus depot,,, bus boy,,,,auto attlenta,,, csp one,,, pelican porsche parts ,,, alb.

can86 · Post by **can86** » Fri May 19, 2006 11:22 am

busdepot lists the part number but can't find it anyway...they told me it was obsolete. Kerr Auto also didn't have it, So i'll keep making some calls... THanks for the info though!

vwbill · Post by **vwbill** » Fri May 19, 2006 6:33 pm

Hey guys, sorry for the dumb ? but what is the damper pipe gasket?? bill

albert · Post by **albert** » Fri May 19, 2006 6:41 pm

look in the ,,bughaus.com ,,, they show for the 412 round gasket with 3 bolts ,,,

vwbill · Post by **vwbill** » Fri May 19, 2006 8:38 pm

Sorry I didnt see it and couldnt find kerr auto online?? Is this like the filler neck doughnut rubber between the body and filler or is this a ring like in the exhaust tipe of a beetle or a cooper ring type gasket for a flange? I know of the fuel damper off the pump. Sorry I must be lost! bill
p.s. Is this something in the gasket kit if so I just got a spare 914 set and some misc parts when I was trying to get a thermostat??
Can someone post a link???
Ok are you talking about the ring gasket for a middle exit exhaust tail pipe? If so there is a new listing on ebay for a new middle exit pipe 8067731596. Call the guys at streetand sand toys those guys sometimes can help!? Is it conical or a compression ring if you can measure it I can check some other possiblilty?

albert · Post by **albert** » Sat May 20, 2006 4:33 am

hi, bill ,go to see your ,,pm,, i send you the picture,,aLB.

can86 · Post by **can86** » Sun May 21, 2006 9:04 pm

yes, this is more the "mid" exit...NOt the side exit with three bolts...Mine is for a damper pipe, not tail pipe...

albert · Post by **albert** » Mon May 22, 2006 10:06 am

try ,,,cip 1 ,, auto attlenta ,,and pélican porsches ,,, many sellers said they d,t have the muffler but they sales the damper and the gasket look in the parts description, bus boys , busdépot ,, to ,,alb.