seal p/n 113 311 113 D

Class 11 streeter · Post by **Class 11 streeter** » Sun May 21, 2006 7:22 pm

Anyone know what this is for?

It's from a box of 411 stuff I got off a fellow some time back. The seal itself is about as big around as an old US dollar coin and about 3/4" tall, and has a spring like a crank pulley seal.

Just curious!

Glenn · Post by **Glenn** » Sun May 21, 2006 7:28 pm

It's a tranny input shaft seal.

Class 11 streeter · Post by **Class 11 streeter** » Sun May 28, 2006 10:44 am

Thanks Glenn, you are da man!

Is it 411 specific, or does it go on the T1 style trans?

Post by **Marc** » Sun May 28, 2006 11:06 am

I don't believe I've ever seen a "D" revision input shaft seal (but it's been years since I worked in the trade). The number I'm familiar with is the 113 311 113A, which fits many applications...presumably so does the "D"

http://www.bughaus.com/transaxl.htm

raygreenwood · Post by **raygreenwood** » Tue May 30, 2006 6:47 am

I'll have to pull up the type (004) gear box mainshaft seal number. On a type four 004 four speed, it is specific. It has a different shaft size than types 1-3.

Oh...here it is. 004-311-491A. A standard cross match seal available is CR-6620. The diemensions are 17x30x7mm Ray