what oil pressure should you see?

51MAN · Post by **51MAN** » Thu Sep 20, 2007 11:18 am

trying to help a long distance mate out...
limited info at the mo...

used 2.1 with "buzzer of doom" going..
all the switches have been changed, wiring checked and supposedly good oil pressure (I suspect its been done from cold though) but no numbers..

? use the "low" pressure port and run it up the road good and hard...

Idle psi?
2000rpm+ psi?
cheers

SteveW · Post by **SteveW** » Fri Sep 21, 2007 2:47 am

At oil temp of 80 degrees C - RPM at 2000 the pressure should be 29psi

I am still not convinced that Neal has the correct sensor in the high rev position.

51MAN · Post by **51MAN** » Sat Sep 22, 2007 12:16 am

yeah Steve, that was my thought, but it could also be a gen low pressure...