Auto trans brace image

66 deluxe · Post by **66 deluxe** » Sat Aug 16, 2008 7:08 pm

Just wanting to find a picture of the brace that holds the auto trans to a type 4 vehicle, not the rear bar on engine . I have almost finshed building a 1911 type 4 for my notchback which is an auto and i want to make a brace that holds the auto trans to the body, i have already made the rear bar for the engine. I am thinking of using the original type 3 rear bar to make the brace. Any help would be great.

Thanks, Damo.

Lars S · Post by **Lars S** » Sat Aug 16, 2008 11:22 pm

Damo, not sure if this is the bar for the manual or the automatic or both...

The lower one is from chassie no 410 2000 001

Lars S

66 deluxe · Post by **66 deluxe** » Sun Aug 17, 2008 2:09 am

Lars S, thats what i was looking for, the top one is the auto, bottom is manual, that gives me a better idea to go from, thanks so much mate.

Cheers Damo.

jasle · Post by **jasle** » Sun Aug 17, 2008 2:24 am

you could get a swingaxle sub frame. weld in the brackets for the irs. then you'd have frame horns and rear engine hanger. then build the bracket that goes under the trans, hooks to the top of the shock towers.