Has anyone actually done a 4" bore Oxyboxer for the street ?
Will it live ?
How about 96 or 97mm Type 4 cylinders ?
(yes,nothing lines up)
96 x 82 = 2374
97 x 82 = 2424
4" Oxy for the street ? Anyone done it ?
-
Unkl Ian
- Posts: 872
- Joined: Sat May 25, 2002 12:01 am
4" Oxy for the street ? Anyone done it ?
I've read lots of speculation,both ways.
Has anyone actually done a 4" bore Oxyboxer for the street ?
Will it live ?
How about 96 or 97mm Type 4 cylinders ?
(yes,nothing lines up)
96 x 82 = 2374
97 x 82 = 2424
Has anyone actually done a 4" bore Oxyboxer for the street ?
Will it live ?
How about 96 or 97mm Type 4 cylinders ?
(yes,nothing lines up)
96 x 82 = 2374
97 x 82 = 2424
-
Stripped66
- Posts: 1904
- Joined: Tue Sep 18, 2001 12:01 am
http://www.shoptalkforums.com/viewtopic.php?t=105129
It's 2 or 3 threads down from this one.
The case and cylinders are absolutely no issue whatsoever. The problem is the cylinder heads. Aside from the JPM heads, few streetable heads exist that will accept the modifications/stud relocation necessary to run larger than 94mm bores.
It's 2 or 3 threads down from this one.
The case and cylinders are absolutely no issue whatsoever. The problem is the cylinder heads. Aside from the JPM heads, few streetable heads exist that will accept the modifications/stud relocation necessary to run larger than 94mm bores.