small rectangular pieces of tin

69BeatL · Post by **69BeatL** » Mon Jun 29, 2009 6:54 pm

/Users/dummy/Desktop/IMG_0348.JPG
I'm reassembling the engine of a 69 Beetle after a valve job, and have two small rectangular pieces of tin with a tab at each corner. where do the go?

baja5 · Post by **baja5** » Mon Jun 29, 2009 8:08 pm

Sounds like you have the lower air deflectors. they snap into the lower head studs above the pushrod tubes. make sure you put them back in.

Post by **Piledriver** » Mon Jun 29, 2009 8:14 pm

baja5 wrote:Sounds like you have the lower air deflectors. they snap into the lower head studs above the pushrod tubes. make sure you put them back in.

...before the pushrod tubes/heads go on...

You have to post images to a web reachable/readable site, your ISP may provide some space, or use something like photobucket etc.

You can then link from there...