The issue was rocker alignment. So swivel feet are center because they don't rotate the valve, or as close to centered as you can get, you don't want the foot half way off the valve. You have to remember the swivel feet came from the six cylinder and unless you've been in one, you wouldn't know they are centered.
Can the springs rotate the valves ? The answer is yes, not so much on compression, but on decompression when their under their own power closing the valves the winding of the springs promote this.
Here's a link:
https://www.google.com/url?sa=t&rct=j&q ... Ra_7CvSLlJ
Solid Spacer Rocker Alignment
-
Type 4 Unleashed
- Moderator
- Posts: 2202
- Joined: Tue Nov 08, 2005 10:43 pm
Re: Solid Spacer Rocker Alignment
Richard
EMW
“Have you ever noticed how some people never
have the money to do it right, but can always
find the money to do it twice ?”
EMW
“Have you ever noticed how some people never
have the money to do it right, but can always
find the money to do it twice ?”
-
Deefer66
- Posts: 24
- Joined: Fri Dec 06, 2019 12:32 am
Re: Solid Spacer Rocker Alignment
...as long as something else is giv8ng them a spin I won't have to worry ..
Back on allignment...
Sent from my SM-G930F using Tapatalk
Back on allignment...
Sent from my SM-G930F using Tapatalk