Neil,
Here is a some information concering your quest for fan intake boot. "The boot flange that bolts to the Type 4 fan shroud is quite rare. A VW parts manual shows the part number as 021-119-609A and was installed on all years of 411 and 412 station wagens (Variants).
The most difficult part of solving this problem is locating this flange. You will probably have to check local wrecking yards, eBay, or maybe see if you can get your local VW dealer to check their shelves for an NOS one. Use this flange with the rubber bellows and clamps and your engine will be getting a supply of fresh air." This information came from this site http://www.tunacan.net/t4/tech/type3.shtml
Select the fan intake boot to read the section above. There is even a picture from a manual. http://www.tunacan.net/t4/tech/type3_pi ... e-boot.gif
It has become a sought after item when installing a type 4 motor in a type 3 vw.
Good Luck
Stufenheck
1965 Notchback w/914 2L motor
[This message has been edited by Stufenheck (edited 12-18-2002).]
air intake boot
-
Davidf
- Posts: 19
- Joined: Sun Jul 21, 2002 12:01 am
air intake boot
i have one...i look on my spare engine and it's look like #35 on this link http://www.tunacan.net/t4/tech/type3_pi ... e-boot.gif
The part number on it is 021 119 604A.
The part number on it is 021 119 604A.
-
Davidf
- Posts: 19
- Joined: Sun Jul 21, 2002 12:01 am
-
njv
- Posts: 817
- Joined: Sat May 19, 2001 12:01 am
air intake boot
hello.
you have mail david.
as a side note if i get one of these plastic air intake shrouds i will be doing a plaster of paris and molding some out of glass if theres a requrement?
merry xmas and a happy new year.
------------------
neil verdon 1966 t3 sqr on irs pan.
you have mail david.
as a side note if i get one of these plastic air intake shrouds i will be doing a plaster of paris and molding some out of glass if theres a requrement?
merry xmas and a happy new year.
------------------
neil verdon 1966 t3 sqr on irs pan.
