What to use for lifters?

vw@micron.net · Post by **vw@micron.net** » Mon Jul 10, 2000 7:48 am

John C. will have the inside Scoop on the Performance Technology Frankenstein heads which are Type 1 heads reworked to fit the Type IV engine. They were pictured in VW Trends about 5 months ago I think. John is buying one of the first sets.

CptanPanic2 · Post by **CptanPanic2** » Mon Jul 10, 2000 8:43 am

I have been needling John C. to start posting here, there was even an aircooled.net forum for a second, but that was scratched. If you talk to him, let him know there is some good discussion going here, and he should be involved.
Brian

morpheus · Post by **morpheus** » Mon Jul 10, 2000 8:01 pm

type I headz on type IV case!!!!!I would love to put a 1 5/8 merged header on my type IV with stinger.

If this conversion is successful I am sure type IVs will be more recognized in America
so parts and competition will go in force.John C. would be a good rep. to start a trend.

satlee · Post by **satlee** » Tue Jul 11, 2000 3:25 am

Hi,

I have just fitted a Eurorace 'G' grind into my type 4 and was recommended Johnston lifters as the ideal pairing. That was by Stateside Tuning over here in the UK.

Mav