Page 2 of 3
181 Parts Swap and Sell
Posted: Mon Feb 24, 2003 6:12 pm
by turbo_girl
I could use a fan shroud... anybody got one in nice shape?
hes33@hotmail.com
Thanks!
Heather
181 Parts Swap and Sell
Posted: Mon Feb 24, 2003 7:47 pm
by Bob Ingman
Heather can we assume that you need a fan shroud for a 73 Thing since the 74 shroud is the same as that of the beetle? Good luck. Bob Ingman
181 Parts Swap and Sell
Posted: Tue Feb 25, 2003 5:58 am
by 851duck
bdj,
I'm interested in your front fenders. My Dad lives about an hour and a half north of Ottawa. Where are you? I'm in the states in Pennsylvania.
Let me know if they are still available.
Thanks,
John
john_swingle@fanniemae.com
181 Parts Swap and Sell
Posted: Tue Feb 25, 2003 6:27 am
by turbo_girl
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Bob Ingman:
Heather can we assume that you need a fan shroud for a 73 Thing since the 74 shroud is the same as that of the beetle? Good luck. Bob Ingman<HR></BLOCKQUOTE>
You are correct Bob- my bad, I should've said that I wanted a '73 shroud. Thanks - Heather
181 Parts Swap and Sell
Posted: Tue Feb 25, 2003 7:40 am
by bljones
yep, fenders are still available. e-mail me directly at
bljones@execulink.com
181 Parts Swap and Sell
Posted: Tue Feb 25, 2003 5:49 pm
by 851duck
bdj,
Tried to email you today. Did I get the address right?
Thanks,
John
181 Parts Swap and Sell
Posted: Tue Feb 25, 2003 9:50 pm
by Bruce2
I have ZF limited slip diffs for your T181 and can deliver it to SoCal in a couple of weeks.
181 Parts Swap and Sell
Posted: Wed Feb 26, 2003 8:45 am
by bljones
851, yep, you got the address right... return e-mail is on it's way to you.
181 Parts Swap and Sell
Posted: Thu Feb 27, 2003 12:28 am
by Mattt
73 Thing parting out, rusty, good for a prerunner project. I have the body shell, pan, complete front and rear suspension, gas tank, 14" non stock rims, decklid and hood that need work, misc other. Im in Anaheim, CA
714-701-1723
181 Parts Swap and Sell
Posted: Thu Feb 27, 2003 8:12 pm
by timgud
Anyone have an extra latch for the top frame? The part that attatches to the top,and secures the top frame to the winshield frame.
181 Parts Swap and Sell
Posted: Sun Mar 02, 2003 12:07 am
by petevw
WANTED:
tranny output shafts
type 181 Thing inner flanges that have 33T x type2 CV
i need 2, but 4 would be nice so i have a couple extra.
thanks,
pete
181 Parts Swap and Sell
Posted: Sun Mar 02, 2003 8:41 pm
by lastsafari
timgud:
Mike Basso has some brand new nos.
181 Parts Swap and Sell
Posted: Sun Mar 02, 2003 10:40 pm
by BobMiller
Cleaning out my garage: (Locking Gas Cap - Sold) New Combo Radio Mount and glove compartment door, Thing Shop parts, no lock or key, needs a little clean up $75.00; New Thing Shop split style exhaust system, use with "J" tubes or heat exchangers, 3 years old, never mounted or used $120.00. e-mail or phone
vwthing@earthlink.net 909-776-1935
------------------
1966 MANX SR2 (Karma Coachworks), 1974 VW THING
[This message has been edited by BobMiller (edited 03-03-2003).]
[This message has been edited by BobMiller (edited 03-04-2003).]
181 Parts Swap and Sell
Posted: Wed Mar 19, 2003 8:35 pm
by Thingguy
I have the shell of a 74 THING that I will need out of my way soon. I am
keeping the front from the gas tank forward but can cut off another section
to please. The rockers have some rust but I have seen much worse. I am in
Kansas City, Missouri & will drive a couple of hours or so for gas money to
help get it to you. I also have various other parts, let me know what you
need & I'll let you know if I have it. I will be heading to Branson Missouri towards the end of May, could possibly bring it with me. E-mail me for pictures.
Thanks!
Scott@kcfd.com
181 Parts Swap and Sell
Posted: Thu Mar 20, 2003 4:07 pm
by germansupplyscott
i have two rear pan sections, these are the ones that go from behind the seat rails back. they are ghia pan sections, heavy duty made by tabco and are new.
scott lyons