Page 2 of 2
Posted: Tue Jun 03, 2003 11:00 am
by 1fasbug
I just ordered the webcam today. They recommended the 163 which is between a engle 110 and 120. I ordered it with 112 lobe seperation. I also got the magnum straight cut gears and web lifters. I will be interesting to see the difference with the lobe seperation.
Posted: Thu Jun 05, 2003 9:03 am
by 1fasbug
I ordered weber 44 working with the rule of 4 or 5 mm smaller than the intake valve for a mild engine. I was worried that 40's with the 28mm venturi would have been too small and I wanted some room to move around in case i decide to do something different with the motor later. Can anyone offer suggestions on the jetting based apon these figures:
2007cc
webcam 163
8:1
Thanks for the help
Posted: Mon Jun 09, 2003 6:01 pm
by Kiwi
I also have a bus that will be getting a new engine soon. I was planning on a 2110. I have been reading about these SS pistons and was wondering if I would be able to include them in my build up? Are SS pistons good for a bus? Any advice Jake?
