Page 2 of 3

transmission

Posted: Mon Feb 07, 2005 5:00 pm
by albert
ah, ray ,,fans ,,,i find one for now ,,,tras,,,shop,,, (http://www.gex.com/16atrans.htm ) the page open on the motor but go at the end you have tr. for 411-412 ,,,,i have couple adress more for that , i find some time lather

transmission

Posted: Mon Feb 07, 2005 5:28 pm
by albert
oh i thing , i make flat rate charge for my dictionnaire ,ha,ha,ha, ok , i d,t know if brazilia car have the exact dimention of the vw412 but with the road accident , for to restore some thing , i thing the back steel parts can fit or front steel plate or the floor can doo some good job but it is for exploration thing ,,go to see the page 28-30 for brazilia ,,,,,,,adress is (www.igpbr.com/ingles/index.htm ) that is the factory parts

transmission

Posted: Mon Feb 07, 2005 5:53 pm
by albert
ok, i find second adr. for trs. but i am not sure if it is very good , my pif said me ( same thing ray said ) the annonce is for type 2and 4 but ????ok go to see the page for trs. (www.qualitygermanautoparts.com/mainframe/htm) i have couple more auto and man.trs ,,at lather

Posted: Mon Feb 07, 2005 6:07 pm
by raygreenwood
Albert, thanks for the link. That is GEX. They lump the type 2 late 6 rib in with the type 4...411/412..becasue they don't know there is a difference. They assume all vehicles with type 4 engines used teh same tranny just because the bell housing and the CV joint is the same. I spoke to them some time ago when I saw their ad...and wondered if they really had type 4 trannys. They didn't know what I was talking about and didn't care. The quality of their work is really poor on their engines. If they had a type 4 tranny for sale...i would buy it just for parts for sure. But...thanks for trying! Ray

Posted: Mon Feb 07, 2005 6:12 pm
by DeathBus
WHAT DO YOU MEAN RAY! GEX RULES! :shock: :twisted: :roll:

Posted: Mon Feb 07, 2005 6:37 pm
by raygreenwood
You know...their workmanship is terrible...but it appears they sell the same baseline new parts as others. Pistons, cylinders, bearings etc. The prices arn't bad. But......and its been a while....have you ever called to ask them a question about parts? They were like talking to a box of rocks! they almost appeared to have inherriteed some of the line from rocky mountain motorworks. I never had a problem with RMMW. I always got what was described. But the new place...mid america motorworks...has nothing. Ray

Posted: Mon Feb 07, 2005 7:02 pm
by DeathBus
raygreenwood wrote:You know...their workmanship is terrible...but it appears they sell the same baseline new parts as others. Pistons, cylinders, bearings etc. The prices arn't bad. But......and its been a while....have you ever called to ask them a question about parts? They were like talking to a box of rocks! they almost appeared to have inherriteed some of the line from rocky mountain motorworks. I never had a problem with RMMW. I always got what was described. But the new place...mid america motorworks...has nothing. Ray
Yeah Mid America has absolutly no Type 4 engine parts, I get most of my engine stuff from either Bus Depot or CIP1. Have a guy in the local club who I tried to talk out of putting a GEX in his Westie, he took someone else advice and spent 2k on a solid lifter 2 litre, that wont last 10k! :roll:

transmission

Posted: Mon Feb 07, 2005 7:49 pm
by albert
hi ray you tried ,,,,just vee dubs inc he have annonce for manuel and auto trs.

transmission

Posted: Mon Feb 07, 2005 8:19 pm
by albert
ok , there is my best ,,make on,,, google,,, foto,,, not web ,,,,vw tranaxles ,, and you have adress there ,,,, stuff vw transaxles for street,sand,race,vintage ,,,,you have auto trans ,and manuel trs.

Posted: Mon Feb 07, 2005 10:29 pm
by raygreenwood
Cool! you know I will try them all. Thanks Albert

transmission

Posted: Tue Feb 08, 2005 4:45 am
by albert
he guy if you go on ,,,,,google ,,,,,, foto, picture ,,,,,and if you find by accident some fotos ,,,,,, with child xxxxx,,,,,,,,, d,t open the page or d,t stay there, the word police for the sex can take your adress and you can receve some non appréciate visitor ,,, not problem if it is for normal thig ,,,,i ear that at the tv

Posted: Tue Feb 08, 2005 6:38 am
by ubercrap
Uh, OK man.

Posted: Tue Feb 08, 2005 7:02 am
by ubercrap
OH, I see, "GEX" at the top of the page (what the hell does that stand for anyway?), the fact that you would bring that up makes a little more sense now...

transmission

Posted: Tue Feb 08, 2005 8:40 am
by albert
hey , uber , you have big funn with this kind of search on google,,,, you can put any name you want ,, ex mtor or geer no, or any vw parts no. and you receve all the thime a picture ,, foto ,,, plus that go every were in the word , the photo d,t have linguage ,,,

Posted: Tue Feb 08, 2005 11:05 am
by raygreenwood
GEX...is an acronym (obviously). It stands for Generally our Engines Xplode....... :lol: Ray