Page 2 of 2
Posted: Thu Aug 03, 2006 9:58 am
by 51MAN
I asked about the boots as the parts place listthem as different items for a 924/944 or bus...
OK so the drive shafts are no use.. though that would be the case, narrower track and all that.
Gonna have a look round the breakers, a set of OE 924 cvs and boots would help with a little project I am working on..
Posted: Sat Aug 05, 2006 12:56 pm
by vwthingboy
Posted: Sun Aug 06, 2006 1:38 am
by 51MAN
Yeah, thats the site that got me thinking..
Cheers
Si
Re: 181 cv to bus?
Posted: Fri Nov 21, 2014 1:03 pm
by ddbyrd3
I know this link is old, but I want to update info for those that may go to the link:
http://www.allzim.com/acatalog/CV_Joint ... _924S.html
expecting to buy true TYPE 4 CV's. The CV's these guys sell are labeled 944.331.901 Which is a type 4 944 CV. However, what you get in the box is actually a type 2 CV. I know because I just ordered them and this is what I discovered.
They state, because the CV's are interchangeable, they only sell the type 2 CV even though it is identified as 944.331.901. Due to street cars don't require the full 22 degrees of angulation.
Just keep that in mind if you are truly seeking type 4 CV's.