Here's mine.

MarioVelotta · Post by **MarioVelotta** » Thu Dec 24, 2020 10:56 pm

rubenski wrote: ↑Thu Dec 24, 2020 10:01 pm Teamwork!

Keep us posted!!!

That engine looks killer!

Verstuurd vanaf mijn SM-A515F met Tapatalk

panel wrote: ↑Thu Dec 24, 2020 8:25 pm Good work you guys !

Clonebug wrote: ↑Thu Dec 24, 2020 2:35 pm That engine is going to sound great on the track building boost on launch control....

Yes yes yes

MarioVelotta · Post by **MarioVelotta** » Mon Dec 28, 2020 9:46 am

buguy · Post by **buguy** » Mon Dec 28, 2020 4:09 pm

I really like how when you come off the power it doesn't stumble, hiccup, or even idle down at all. Very nice!

panel · Post by **panel** » Mon Dec 28, 2020 9:46 pm

So sweet ! Not a bad guinea pig of an engine . Sounds super healthy guys , well done!

jes67 · Post by **jes67** » Tue Dec 29, 2020 5:35 pm

All the other stuff is working !!
Clutch has held
Intake is tight
Doesn't leak oil,,after some changes.
Header has held up
Fans work good
Alternator lined up
Oil cooler,,cools.
Intercooler
Throttle setup.

Crazy

Did an oil change,Oberg check,valve adj.check,after day one,, called it good,,then two more days of pulls.

Have a Happy New Year.

MarioVelotta · Post by **MarioVelotta** » Fri Mar 12, 2021 8:00 am

2021-03-10 19.04.42.jpg

buguy · Post by **buguy** » Fri Mar 12, 2021 10:30 am

Nice!

jes67 · Post by **jes67** » Sun Mar 28, 2021 7:43 am

Update.
Had some crank lash, on the guinea pig.
So I ripped into it.
Unbelievable how beautiful everything looks, for the amount of run time.
Crank lash is due to the " loose " mesh on my straight cuts.
I'm just gonna put it back together.
All the extra prep on this motor seems to have paid off.

Now back on the dyno,, 300hp is right there.

buguy · Post by **buguy** » Sun Mar 28, 2021 4:36 pm

Clean!

jes67 · Post by **jes67** » Sun Mar 28, 2021 5:37 pm

Get the dyno ready Mario,,

jes67 · Post by **jes67** » Sun Mar 28, 2021 5:39 pm

buguy wrote: ↑Sun Mar 28, 2021 4:36 pmClean!

Dude,, its taken a whooping and still ticking.

Only need 75 more hp.

buguy · Post by **buguy** » Sun Mar 28, 2021 5:53 pm

6 more psi!

xzener · Post by **xzener** » Tue Mar 30, 2021 7:11 am

Man! That thing sounds like a jet engine getting ready for takeoff!!!

jes67 · Post by **jes67** » Sun Sep 26, 2021 5:40 pm

Mario has just about finished up.
Saturday tested the launch controls,, hope to take it out mid October for some 1/8 mile test.

rubenski · Post by **rubenski** » Mon Sep 27, 2021 1:17 am

Saw it on Facebook and insta. Mean machine!

Verstuurd vanaf mijn SM-A515F met Tapatalk

Shoptalkforums.com

Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.

Re: Here's mine.