Page 3 of 3
Re: My bug redoing old turbo setup, I hope!!
Posted: Mon Oct 15, 2018 10:08 am
by rubenski
Oh crap, must have misunderstood him.
I was wrong, we are putting double Oteva springs on it.
Oopsie
Verstuurd vanaf mijn SM-A520F met Tapatalk
Re: My bug redoing old turbo setup, I hope!!
Posted: Mon Oct 15, 2018 11:37 am
by Chip Birks
That could be true, if yours are worn out, or just a really cheap bad brand.
Re: My bug redoing old turbo setup, I hope!!
Posted: Mon Oct 15, 2018 11:56 am
by rubenski
They arent bad, but they wont be strong enough to be turbo'd.
Cant be worn after 1 year and 4000km driving.
Verstuurd vanaf mijn SM-A520F met Tapatalk
Re: My bug redoing old turbo setup, I hope!!
Posted: Mon Oct 15, 2018 6:07 pm
by petew
Double springs about cancelling harmonics at higher revs, not just seat pressure.
Re: My bug redoing old turbo setup, I hope!!
Posted: Mon Oct 15, 2018 7:27 pm
by rubenski
Yess, shame on me...
Verstuurd vanaf mijn SM-A520F met Tapatalk
Re: My bug redoing old turbo setup, I hope!!
Posted: Mon Oct 15, 2018 8:59 pm
by petew
^ No shame. We're all friends here. Ask me about all the mistakes I've made... or don't
Re: My bug redoing old turbo setup, I hope!!
Posted: Tue Oct 16, 2018 5:58 pm
by gwhaling
My setup I plan on limiting to 6k rpm. Also not boosting over 10 psi for a several reasons. The motor ran strong with single springs and the w 120 cam. I know boosting needs stronger springs though. If I do use the cam and single springs I will buy new springs and shim them,checking coil bind. I really like all the info on this forum!!