Page 22 of 23

Re: 936 a reBUILD thread

Posted: Fri Jun 19, 2015 4:53 pm
by BAJA-IT
Rear tires are back on, the carb is rejetted, and the oil is topped up.
Fired it up last knight and she sounds great.
See you in Vernal next week.

Re: 936 a reBUILD thread

Posted: Wed Jun 24, 2015 8:57 pm
by 560
OK, just found this thread tonight. Not sure how I missed it way back when, but I have not been on much lately sorry to say. Super great progress, info and stories talking about the car and races.

Mike

Re: 936 a reBUILD thread

Posted: Sun Aug 07, 2016 1:06 am
by BAJA-IT
Wow, it's been awhile since I posted in this thread.
Had to miss the last BOR race in Jackpot back in July, we were there to help put on the race just not racing, because we found what we think was the cause of our ring & pinion troubles.

Image

Image

We think the side cover was cracked for some time and flexing when a load was put on it thus taking out the ring & pinion.

Re: 936 a reBUILD thread

Posted: Fri Aug 19, 2016 10:27 pm
by dustymojave
Now THAT'S an interesting one! I can't say I've ever broken that in a heavy duty side plate. I've seen it broken like that in a stock cast mag side plate though.

Re: 936 a reBUILD thread

Posted: Mon Aug 22, 2016 4:30 pm
by BAJA-IT
No one that I have talked to has ever seen this, I guess there is always a first.
I think it has been cracked for some time and finally broke all the way around this last time.
We also replaced the case because it had a crack from one of the side cover studs heading to one of the pinion bearing retainer studs.
Now I just need to get it back in the car for the next race Sept. 10th in Vernal, Ut.

Re: 936 a reBUILD thread

Posted: Wed Aug 24, 2016 8:03 pm
by sideshow
So what caused that sidecover failure? too much wheel travel? Internal damage? External force?

Re: 936 a reBUILD thread

Posted: Thu Aug 25, 2016 11:56 am
by BAJA-IT
The trans had a broken reverse gear at one time and it ended up taking out the ring and pinion, I think, but not sure, that when the tooth of the reverse gear got caught in the R&P it may have cracked the side cover. The cover was never checked because no one had seen one break before.

Re: 936 a reBUILD thread

Posted: Fri Aug 26, 2016 3:19 pm
by BAJA-IT
The trans is back in the car and the axles and tubes are on, still need to bolt them to the spring plates. We also replaced the lower heims in the shocks as they were loose.

Re: 936 a reBUILD thread

Posted: Thu Apr 27, 2017 9:13 am
by CentralWAbaja
When is the next race guys? Doing Vernal?

Re: 936 a reBUILD thread

Posted: Fri May 05, 2017 4:19 pm
by BAJA-IT
The car will be racing in Vernal, but I will have to miss this race, I will be flying back from Atlanta the day of the race. The boys will be racing without me.

Re: 936 a reBUILD thread

Posted: Fri May 05, 2017 5:08 pm
by kyle_pc_75
You gotta mention why....

Re: 936 a reBUILD thread

Posted: Fri May 05, 2017 5:10 pm
by CentralWAbaja
The boys will be racing without you? WOW! passing of the torch?

Very cool! Tell them that I expect a FULL RACE REPORT haha

Re: 936 a reBUILD thread

Posted: Sat May 06, 2017 6:57 pm
by Leatherneck
CentralWAbaja wrote: Fri May 05, 2017 5:10 pm The boys will be racing without you? WOW! passing of the torch?

Very cool! Tell them that I expect a FULL RACE REPORT haha
Maybe the tranny will last now :shock: :P

Re: 936 a reBUILD thread

Posted: Sat May 06, 2017 9:48 pm
by TimS
kyle_pc_75 wrote: Fri May 05, 2017 5:08 pm You gotta mention why....
Indeed. Curious now...

Re: 936 a reBUILD thread

Posted: Tue May 09, 2017 2:59 pm
by BAJA-IT
Ok then, I have to go to Atlanta for work. I am one of the top 36 Jaguar parts countermen in the country (ranked 2) and I am invited to the Guild challenge to compete with the other 35. The top 8 then get invited to go to Vienna Austria in Sept. for a week all expenses paid.
I will be back in the car for Jackpot in July.