Shoptalkforums.com

What brand of wastegate(s) ?

panel wrote: ↑Sun Nov 22, 2020 12:23 pm What brand of wastegate(s) ?

Tial, they are both 38mm

More upgrades during the off season!

All 4 gears now have the Dave Folts face plates! (Also upgraded to a Weddle 4.13 Ring and Pinion!)



Rev-6 twin disc clutch from Ron Lummus!



CO2 boost control!



...and I realized that I didn't show a pic of a lot of the new engine management stuff...

Do those Dave Folts face plates function a bit like a syncro ring?
some very nice kit you have there

Ian Godfrey wrote: ↑Thu Jan 28, 2021 6:15 pmDo those Dave Folts face plates function a bit like a syncro ring?

Not exactly; they replace what would normally be the synchro ring, cone and hub. This allows full power speed shifting with less risk of failure and longer maintenance intervals. I still use the clutch, but don't lift on the throttle.

some very nice kit you have there

Thank you!

What EFI brand were you running before ?

Before, Jeff was running the Redline 882C. The same as what I have on my baja bug. I need to upgrade to something with better/easier software. The hardware in the old ECU is still very robust.