Shoptalkforums.com

http://www.shoptalkforums.com/viewtopic ... 00&start=0



http://www.shoptalkforums.com/viewtopic ... ght=bumper

some that i found, think we should start a bumper topic

Considering that mine is in the shop in a thousand pieces you could be right......

seabeebuggy wrote: I think your pissing some people off because you built a baja in a month. where others have done nothing for a year.

Leatherneck wrote:Looks alot like Rickos but the tires are bigger and has a rear cage and skidplate.

I actually have some nice big tires for my front end now. Picked them up from Motochris on my way back from rasor road. Thanks again chris!

I also still have my rear cage and skidplate. They are just no longer attached to my car at the moment...

i'll get some pics. i have some new ideas for the front bumper. that one was made from some pieces i saw laying by the car one day and i got a quick idea but it didnt turn out the way i thought it would

let me know what you guys think. i was also thinking of add some aluminum the the to side on the bottom or should i just leave it like that

Tiko, that drawing looks a lot like what I built for mine.






The A arm setup pretty much forced me to have the sides straight up and down to give the most strength (IMO )

I still have some bracing to do, and I haven't decided if I will do any small 90* hoops to hang under the cross bar and tie to the supports where I can mount some small fog lights or not. Most likely not at this point, but it wouldn't be hard to do in the future if I need more lights

hell ya bro that looks just like what i had in mind thats cool im glad i got to see the real deal first

whats it look like from the side

tikotiko wrote:whats it look like from the side

I'm not sure what you mean... I did post a side view.

Big Dave wrote:

tikotiko wrote:whats it look like from the side

I'm not sure what you mean... I did post a side view.

But not a lefty.

im trippin i had a brain fart i see it now thanks dave

more little progress lights are bright

i wired the rack

i used a 6 circut panel still gotta clean up the wiring

added a switch for the 2 middle lights

and i was told to add a light to be seen in the dust so i took the bullet lights off the front and added one to the back



i'll only be running 4 lights at a time when needed and i'll be making a new light rack soon when i get some time and money. and hopefully i'll have the new front bumper finished by tomorrow.

is there a way to see if my fuel pump is pumping correctly?

Make sure the float bowl is full of gas, remove the fuel line going into the carb and put into a safe container then start the car. You can see if the pump is pumping. Just be very careful not to spill or let fumes near anything hot. Maybe use a longer length of hose than the one thats on there...

and have a fire extinguisher near by.......