Page 1 of 1
411/412 issues
Posted: Sat May 05, 2007 11:41 pm
by func412
I haven´t seen a topic here, where we can tell experiences of the weak point´s of the 411 and 412.
Here is one example, which was a surprise. It looked ok, but under the paint it was totally rusty!
Posted: Sun May 06, 2007 10:59 am
by ubercrap
Hey, where did my floor go?
Posted: Sun May 06, 2007 12:33 pm
by vonkr
Are there any weak points on the 411/412? .....
Grrrrreetings, Ronald
Posted: Sun May 06, 2007 12:54 pm
by ubercrap
Posted: Sun May 06, 2007 12:56 pm
by func412
ubercrap wrote:Hey, where did my floor go?
I didn´t have a floor under the drivers seat, where the battery is supposed to be.
Posted: Mon May 07, 2007 11:37 am
by Wally
I think this is a very negative topic. Would rather see it reversed...
Posted: Mon May 07, 2007 1:11 pm
by raygreenwood
The rust problems with the 411/412....are no worse than any other model. The real issue..is that to make a much quieter ride, many of the body parts were filled with isocyanate foam. Once you do get a leak, the foam fills up with water and rusts from the inside.
Since my company uses iso foam....5000 liters a month...I will find out what disolves it. Ray
