Page 1 of 1
D-Jet Distributor Adjustment
Posted: Thu Aug 23, 2007 11:18 pm
by Bill K.
How is the 209P distributor adjusted for optimum 1.7L D-Jet perf?
Posted: Sun Aug 26, 2007 12:44 pm
by Bill K.
After trying a new search, I found this post by Ray.
http://www.shoptalkforums.com/viewtopic ... 239#732239
I'll give it a try...
Posted: Mon Aug 27, 2007 8:46 am
by raygreenwood
There are a handful of other things that help also. Like...taking slack out of the shaft down near the drive dog. It typiclaly has about 4 times too much slack. Also, polishing the glide ring between the two breaker plates and tightenung the ball and spring and crimping the steel "finger" opposite the ball and spring so it has no more than .005" between it and the breaker plate will make advance more accurate and smoother. Ray