Shoptalkforums.com

trying to help a long distance mate out...
limited info at the mo...

used 2.1 with "buzzer of doom" going..
all the switches have been changed, wiring checked and supposedly good oil pressure (I suspect its been done from cold though) but no numbers..

? use the "low" pressure port and run it up the road good and hard...

Idle psi?
2000rpm+ psi?
cheers

At oil temp of 80 degrees C - RPM at 2000 the pressure should be 29psi

I am still not convinced that Neal has the correct sensor in the high rev position.

yeah Steve, that was my thought, but it could also be a gen low pressure...