Shoptalkforums.com

Posted: **Tue Dec 25, 2007 1:21 pm**

Hey Marco, I didn't want to hijack the oil in my water thread anymore

You wrote - "the hydraulic lifters work fine in these applications but limit lift and total performance(limited cam choise). "

Is this where the ratio rockers come into play by allowing available lift from milder camshafts?

Posted: **Wed Dec 26, 2007 8:22 am**

Cams are ground intentionaly for ratio rockers or not , for hydros or not, you can "get away" with using ratio rockers on a stock hydro cam because its so mild! but would not recomend running ratio rockers on a non ratio rocker cam(e.g engle 120 with 1.4 rockers is far too agresive)
good luck
marco mansi....

Posted: **Thu Dec 27, 2007 9:51 am**

What cam would you use in a 1.9L that was being used for street and some track (not drag)

Posted: **Thu Dec 27, 2007 4:50 pm**

218 WEB

Posted: **Fri Dec 28, 2007 1:56 pm**

What is that, a part number for a WebCam camshaft?

Posted: **Fri Dec 28, 2007 4:45 pm**

Shoptalkforums.com

WBX engine building question for Marco

WBX engine building question for Marco