924/944/Thing Stub Axles, Type 4 CVs, Axles hardware - SOLD

havasujoe · Post by **havasujoe** » Wed Jul 23, 2008 5:53 pm

924 / 944 / Thing (2) Stub Axles, (4) Type 4 CVs, (2) Drive Axles, (4) Boots, (12) Mounting plates, (24) Bolts. This setup is great with a stock Beetle IRS Transmission and stock Trailing Arms. Type 4 CV joints (944 / 924 / Thing) 100mm CV joints gives 22 degrees of axle travel. These axles are the right length 16 1/8 inches. See blindchickenracing.com for details. Splines and Threads are in xlnt cond. $225.00 plus shipping.

oktr6r · Post by **oktr6r** » Tue Jul 29, 2008 9:00 pm

Thanks, looking forward to getting these do I can put my bus trans in.

dstar5000 · Post by **dstar5000** » Tue Oct 07, 2008 12:15 am

These available?

Don

havasujoe · Post by **havasujoe** » Tue Oct 07, 2008 5:32 pm

Don: The set pictured above has been sold, I did pick up a set from a 944 last weekend - I haven't cleaned them yet. It has 2- Stub axles, 4 - Type 4 CV joints, 2 - 16 1/8 Drive Axles and the mounting hardware(Bolts and Plates) $220 shipped, $200 without the Drive axles (if your going bigger than the Standard Beetle trailing arms, these axles would be to short) No boots - they were cracking, but not split

Thanks
Joe

havasujoe · Post by **havasujoe** » Sat Oct 18, 2008 10:49 am

The 944 set up has been cleaned and is ready to go. Everything looked good.

twowheeletex · Post by **twowheeletex** » Thu Nov 20, 2008 8:29 pm

how much for just the stubs?

ntsqd · Post by **ntsqd** » Mon Feb 02, 2009 8:25 pm

Are these still available (the second set)?

havasujoe · Post by **havasujoe** » Tue Feb 03, 2009 12:19 pm

ntsqd: The second set is gone, but I have a 3rd set from a 924 I picked up a couple of weeks ago. They are complete - (2) Stub Axles, (4) Type 4 CVs, (2) Drive Axles, (4) Boots, (12) Mounting plates, (24) Bolts. $225 plus shipping of $20.00. Total of $245.00

ntsqd · Post by **ntsqd** » Tue Feb 03, 2009 1:15 pm

PM sent

havasujoe · Post by **havasujoe** » Sun Mar 15, 2009 7:56 pm

I picked up another 924 setup. (2) Stub Axles, (4) Type 4 CVs, (2) Drive Axles, (4) Boots, (12) Mounting plates, (24) Bolts. Splines and Threads are in xlnt cond. $225.00 plus shipping. 3/14/09

SOLD

CopperBaja · Post by **CopperBaja** » Mon May 25, 2009 10:54 am

If you get another setup with the Thing stubs, please let me know.

What are these 'kits' going for?

havasujoe · Post by **havasujoe** » Mon May 25, 2009 1:34 pm

I'll be looking at a set in 2 weeks. I'll let you know if there good. Shipping is $20.00

CopperBaja · Post by **CopperBaja** » Wed May 27, 2009 9:40 pm

How much for -minus the stub axles? Picking up a set this week, so at least I can go ahead and mount my trans in the car. yay!

havasujoe · Post by **havasujoe** » Thu May 28, 2009 5:01 pm

$130.00 for (4) CV's, (2) Drive axles, and mounting Hardware (12-plates and 24-Bolts plus $15.00 for shipping.

CopperBaja · Post by **CopperBaja** » Wed Jun 10, 2009 2:07 pm

havasujoe wrote:$130.00 for (4) CV's, (2) Drive axles, and mounting Hardware (12-plates and 24-Bolts plus $15.00 for shipping.

You have pm.

Shoptalkforums.com

924/944/Thing Stub Axles, Type 4 CVs, Axles hardware - SOLD

924/944/Thing Stub Axles, Type 4 CVs, Axles hardware - SOLD

924 Axles

924 Stub axles / CVs / Axles

924 / 944 Axles

924 / 944 / Thing (2) Stub Axles, (4) Type 4 CVs, (2) Drive

924/944/Thing Axles

CV's & Drive axles

Re: CV's & Drive axles