Page 1 of 1
Would these manifolds work
Posted: Tue Aug 26, 2008 5:10 am
by alsehendo
Would these manifolds work on 74 Stock 1.8 Wagon?
With new stock muffler, which I already have.
Obviously no heat.
Posted: Tue Aug 26, 2008 7:25 am
by Wally
Anything 'works' if you menan will the engine run.
These will _probably_ hamper power as off about 3000-3500 rpm due to reversion issues.
Don't use them.
Posted: Tue Aug 26, 2008 10:56 am
by alsehendo
Thanks I'll keep looking for a set of stock heater boxes--hint anyone.
Posted: Tue Aug 26, 2008 11:10 am
by wshawn
With a little work to the outside of the heat box section you can get Type 2 heat exchangers to fit with the bonus of a decent amount of heat in the winter...just make sure the shaped end of the manifolds is correct for your engine.
Mine now runs these and it is warm when needed