Page 1 of 1
NEED piston (just one) 93.98 and (just one) Exhaust Valve 36
Posted: Wed Nov 17, 2010 4:39 pm
by Ghianto
Guys,
Still need for help for this piston...
actually Bret has given me his piston set to me, but i still curious about my piston. does anyone could help me for this.
Ghie
Re: NEED piston (just one) 93.98 and (just one) Exhaust Valve 36
Posted: Thu Nov 18, 2010 12:01 pm
by Stray Catalyst
Generally speaking, you need to have your pistons match each other in weight, as closely as possible. It's better to get a new set than to replace a single one. I'm not sure if the same applies to valves, but I expect it does... why are you trying to replace them as individuals?
Stray
Re: NEED piston (just one) 93.98 and (just one) Exhaust Valve 36
Posted: Thu Nov 18, 2010 4:45 pm
by Ghianto
since the others was fine, so i decide to replace only for the broken piston. Many suggestion to me that original piston have best quality better than after market stock, and i have to admitted that, because mine was built at year 1977 but the condition of the piston just like new. Comparing with after market piston their was not to good.
ghie
Re: NEED piston (just one) 93.98 and (just one) Exhaust Valve 36
Posted: Fri Nov 26, 2010 9:56 am
by Jadewombat
You still need one? I think I have one piston and rod left from a 2.0.
Re: NEED piston (just one) 93.98 and (just one) Exhaust Valve 36
Posted: Sun Nov 28, 2010 8:49 am
by Jadewombat
I dug around in the attic last night and found the 2.0 piston, let me know if you still need it.
Re: NEED piston (just one) 93.98 and (just one) Exhaust Valve 36
Posted: Tue Nov 30, 2010 2:30 pm
by Jadewombat
Jadewombat wrote:I dug around in the attic last night and found the 2.0 piston, let me know if you still need it.
Ghianto,
I tried replying twice, the message just sits in my Outbox but doesn't go through.
>>
It's stamped 93.98 on the top, I pulled the piston pin out and it's a CoFap, not Mahle. Let me know if you still want it, $12 shipped. It's in good used shape, that's the only reason I held onto it all of these years. Had to do a one cylinder fix on my bus one time years ago to squeeze some more life out of the engine.
Sorry about the pictures, my crap camera simply won't focus that close so it's hard to read the writing on the photos.
http://s52.photobucket.com/albums/g30/j ... 000459.jpg
http://s52.photobucket.com/albums/g30/j ... 000456.jpg
http://i52.photobucket.com/albums/g30/j ... 000459.jpg
http://i52.photobucket.com/albums/g30/j ... 000456.jpg