Shoptalkforums.com

Posted: **Mon Apr 25, 2011 11:32 pm**

Im just finishing my 2.1Lt oxyboxer using a DJ case, I dont know what the tapped hole (about 16mm dia) is for ? its situated on the pulley end between oil pump and the filter and directly above the 10mm tapped hole for the engine support bar, and what thread is it? do I just plug it?

Posted: **Tue Apr 26, 2011 12:54 am**

stock oil pressure switch sit's there.
a second one is located between the pushrodtubes cyl 3/4

Posted: **Tue Apr 26, 2011 12:23 pm**

M16 x 1.5.

Just plug it, or put an oil temp sender there.

Shoptalkforums.com

DJ crankcase tapped hole

DJ crankcase tapped hole

Re: DJ crankcase tapped hole

Re: DJ crankcase tapped hole