QSC 96mm pistons, 5.352 rods and 82 stroke

Here's the place for info on converting to a Type V motor!
Post Reply
3literboy
Posts: 87
Joined: Fri May 28, 2010 7:23 pm

QSC 96mm pistons, 5.352 rods and 82 stroke

Post by 3literboy »

Are the 96mm QSC pistons coming in with the wrong pin height? I was thinking about an 82mm Chevy journal crankshaft, 5.352 rods with 24mm pins, and some QSC pistons. The other scenario is offset grind the 76mm to 80mm. Also, I think I am going to run some 40IDFS. Any cam recommendations. I am thinking 9 to 1
Top
Post Reply

Return to “Wasserboxer/Oxyboxer Type V Forum”