Page 1 of 1
Headers / exhaust systems for the WBX
Posted: Thu Aug 30, 2012 6:40 pm
by DORIGTT
Hey all,
I'm looking at a A1 Sidewinder for my WBX, but I haven't seen one in person. Is there any reason (other than the rear head flanges - I could just swap the J-pipes from 1 side to the other right) the systems wouldn't clear the front pulley / waterpump for my Ghia?
Re: Headers / exhaust systems for the WBX
Posted: Thu Aug 30, 2012 7:46 pm
by Steve Arndt
Please let us know, and does it fit a Syncro?
Re: Headers / exhaust systems for the WBX
Posted: Fri Aug 31, 2012 8:32 am
by buildabiggerboxer
dorigtt, you will need to turn the flanges for cyls 4 & 1, i cant say either way if it will clear the water pump, it may hit the 'stat housing on early pumps , or the pulley on later ones. Steve, with a bus install , with all his experience with the vanagons, 10c will be the man to know if it will clear the engine support bar or not, he may chime in later.
Re: Headers / exhaust systems for the WBX
Posted: Fri Aug 31, 2012 9:10 am
by tencentlife
Re: Headers / exhaust systems for the WBX
Posted: Mon Sep 03, 2012 12:16 am
by DORIGTT
If the 1 and 4 pipes are slip-in, I can just swap them correct?
Re: Headers / exhaust systems for the WBX
Posted: Fri Sep 14, 2012 7:04 am
by AMBROSIA
I had a sidewinder style header made by a specialist.
Re: Headers / exhaust systems for the WBX
Posted: Mon Apr 08, 2013 11:41 am
by giuseppe
empi bobcat modificata per il turbo..
