Page 1 of 1
thermostat control rod thread size?
Posted: Mon Apr 07, 2014 5:48 pm
by Max Welton
Gonna make one.
The rod itself appears to be ~4mm. What is the thread?
Max
Re: thermostat control rod thread size?
Posted: Tue Apr 08, 2014 7:49 am
by Steve Arndt
Thread a bolt into your thermostat. Match it up.
I can check tonight at my shop for you if you don't have an answer by then.
Re: thermostat control rod thread size?
Posted: Tue Apr 08, 2014 12:42 pm
by sideshow
It is a common M size/pitch, when I made a control rod I used a hardware store bolt that I then welded to my plain steel bent to fit half.
Re: thermostat control rod thread size?
Posted: Tue Apr 15, 2014 9:58 am
by Max Welton
Max
Re: thermostat control rod thread size?
Posted: Mon Jul 07, 2014 11:55 pm
by Bruce2
For future reference, M4x0.7
Re: thermostat control rod thread size?
Posted: Mon Feb 16, 2015 6:11 am
by ecksrash
I like the nut on the end that goes into the flaps...