Page 1 of 1
Is it right
Posted: Tue Aug 13, 2019 2:22 pm
by Buildingbob
Building a motor have a stock 1600 case 74mm crank, 100 cam 88mm slip ins 5.325 rods, 1.25 rockers 90.5 heads 40/35 valves 1 1/2 inch side winder exhaust and dual empi 34s any suggestions
Re: Is it right
Posted: Tue Aug 13, 2019 2:24 pm
by Buildingbob
Any suggestions
Re: Is it right
Posted: Tue Aug 13, 2019 2:39 pm
by V8Nate
What are you looking to do? A set of IDF's would be better than the ict knock offs but they will work if that's all you have they will just limit your performance
Re: Is it right
Posted: Tue Aug 13, 2019 2:43 pm
by Buildingbob
Pretty much just a daily driver freeway once in a while no racing
Re: Is it right
Posted: Tue Aug 13, 2019 4:48 pm
by V8Nate
That combo will be better than stock:)