1776 with 46cc heads

[joe-ker]

Did a little bit of searching but didn't see anything.

I can get some heads but they are 46cc chambers

My question is that to small, even though I would end up with 9.0 compression, which I know that has been posted, but with no one is saying their chamber size.

This will be a daily driver 65 vw bug

[woodsbuggy1]

It would depend on what cam you are using and what the recommended compression ratio is for that cam. What is the rest of your engine combo?
Kenric

[joe-ker]

not sure on the cam, but possibly a web series cam with 1.1 rockers. Kads, 1 3/8 exhaust

just wasn't sure if the chambers were to small

[saltracer]

You can run that compression and something like a 163 or 218 quite easily. A lot of builders will run a tighter deck and a bit big of chamber to get a certain compression ratio but a .060 deck is more than acceptable.