These are dope as hell!! but...

[chickensoup]

GTR RB26 throttle bodies are exactly what I'm wanting for my port injection project. but they're upwards of 1000 bucks used.

So I need your help!

I need something like the above, that comes off a factory car. Something among the lines of a dual throat ITB(but no injector bungs), that are in the 40-44mm butterfly size range, affordable, and must have at least one TPS and can be split into pairs of two or come that way. motorcycle or cars ITB's, don't matter. the smaller the better. idle air control valve would be nice too.

Thanks!

[Paul H]

I got something just like that in 45mm bore with tps both sides if you want that sort of thing

[chickensoup]

happen to know what it came off of? thanks

[Paul H]

They are aftermarket . Straight off one of my shop shelves

[panel]

Chckensoup.....How bout from a Shelby GT500 Mustang ? Could be others but it's a start.

About 8:34 mins

https://www.youtube.com/watch?v=wiFfjm2QifU

[panel]

BBK ? https://www.bbkperformance.com/gm-305-3 ... ioned.html

[panel]

Not sure if you're doing DBW ?

https://www.cjponyparts.com/ford-perfor ... P3EALw_wcB

You might be able to convert it to cable at that price. You can prolly get a used one from a wrecker.